SINGLE LOW VOLUME SEQUENCER
The C.B.S.SCIENTIFIC Low Volume Sequencers are available in 20cm and 33cm widths and can be ordered with a height of 42cm, 52cm, or 62cm. The reservoirs' low profile design requires less buffer to maintain buffer flow through the gel. Save expense by using as little as 250ml of buffer per reservoir for the 20cm wide units, and 400ml per reservoir for the 33cm units. This sequencer features a bar clamp, a built-in heat dispersion plate, flip-lids, and detachable upper and lower buffer reservoirs. The new hinged flip-lid safety covers allow easy access to the reservoirs and can never be misplaced.

Each Sequencer includes:

	Built-in epoxy-coated aluminum heat dispersion plate
	Bar clamp
	Leak-proof silicone gasket on upper reservoir
	Flip-lid safety covers
	4 molded white spring clamps
	Safety-tip power leads
	Leveling base and bubble level
	Buffer drainage ports

DUAL LOW VOLUME SEQUENCER
The C.B.S.SCIENTIFIC Dual Low Volume Sequencer has all of the convenience and safety features of our Single Low Volume Sequencer, but can run twice as many samples using less buffer and the same amount of valuable bench space. The Dual Low Volume Sequencer is available in 20cm and 33cm widths and with height capabilities of 42cm, 52cm, or 62cm. A rotating base allows the unit to swivel, providing easy access to either side. This sequencer features two bar clamps, built-in heat dispersion plates, flip-lids, and detachable upper and lower buffer reservoirs. The new hinged flip-lid safety covers allow easy access to the reservoirs and can never be misplaced.

Each Dual Sequencer includes:

	Built-in epoxy-coated aluminum heat dispersion plates
	2 bar clamps
	Rotating base
	Leak-proof silicone gasket on upper reservoir
	Flip-lid safety covers
	8 molded white spring clamps
	Safety-tip power leads
	Leveling base and bubble level
	Buffer drainage ports