|
| |
Dedicated Height
Sequencers, Single and Dual
Left: Single Dedicated Height Sequencer, 52cm (h) x 33cm
(w), Cat. # DH-500-33. Right: Dual Dedicated Height Sequencers, 52cm (h) x
33cm (w), Cat. # DDH-500-33. |
SINGLE DEDICATED HEIGHT
SEQUENCER
The C.B.S. SCIENTIFIC
Dedicated Height Sequencers are available in 20cm and 33cm widths and can
be ordered with a height of 32cm, 42cm, 52cm, or 62cm. These sequencers
feature safety-interlocking lids, detachable upper and lower buffer
reservoirs, and a built-in epoxy-coated aluminum heat dispersion plate. A
clear acrylic bar clamp is provided with each unit.
Each Sequencer includes:
 | Built-in epoxy-coated, spring-mounted aluminum
heat dispersion plate
| Bar clamp
| Leak-proof silicone gasket on upper reservoir
| Interlocking safety covers with attached leads
| 4 molded white spring clamps
| Bussed together power leads (CE approved)
| Leveling base and bubble level
| Buffer drainage ports |
| | | | | | |
Custom features available:
| Custom widths (e.g. 25cm and 38cm)
| Flip-lid safety covers with detached power
leads |
|
|
DUAL DEDICATED HEIGHT
SEQUENCER
The C.B.S.SCIENTIFIC
Dual Dedicated Height Sequencer has all of the convenience and safety
features of our Dedicated Height Sequencer, but now you can run twice as
many samples using less buffer and the same amount of valuable bench
space. The Dual Dedicated Height Sequencer is available in 20cm and 33cm
widths and with height capabilities of 42cm, 52cm, or 62cm. A rotating
base allows the unit to swivel, providing easy access to either side. This
sequencer features two bar clamps, two built-in, spring-mounted,
epoxy-coated aluminum heat dispersion plates, safety-interlocking lids,
and independent detachable lower buffer reservoirs.
Each Dual Sequencer includes:
| Built-in epoxy-coated, spring-mounted aluminum
heat dispersion plates
| Divided upper reservoir
| 2 bar clamps
| Rotating base
| Leak-proof silicone gasket on upper reservoir
| Interlocking safety covers with attached leads
| 12 molded white spring clamps
| Bussed together power leads (CE approved)
| Buffer drainage ports |
| | | | | | | |
Custom features include:
| Custom widths (e.g. 25cm and 38cm)
| Flip-lid safety comvers with detached power
leads |
|
|
|
